KNIVES ON STOCK.

For prices mail me: adam@kornalski.com

----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

STEEL - AISI A8Mod (Bohler Chipper, Uddeholm Viking)


General Uddeholm Viking is a oil-air-vacuum-hardening steel which is characterized by: good dimensional stability during heat treatment good machinability and grindability excellent combination of toughness and wear resistance normal hardness in the range 5258 HRC ideal for surface coating (CVD, PVD) Exaggerated sketch of a typical punch and die in action. The chemical composition of Uddeholm Viking gives a hardness potential of 58 HRC with compressive strength and wear resistance accordingly. The small amount of primary carbides means a high chipping resistance and with 8 % chromium follows a very good hardenability and also a fairly good resistance to corrosion.
Typical

  C      Si      Mn     Cr    Mo    V      analysis %

0.5    1.0     0.5     8.0  1.5   0.5
Applications Uddeholm Viking is a versatile, high alloyed tool steel characterized by the right combination of toughness and wear resistance required for heavy duty blanking and forming.

-------------------------------------------------------------------------------------------------------

STEEL - AISI O2 (Bohler K720)

Oil hardening, dimensionally stable tool steel.

Tools (punches) and dies for blanking, punching and similar operations; threading and wood working tools, machine knives for the pulp, paper and metalworking industries; measuring tools and plastic moulding dies.

Chemical composition (average %)

  C       Si     Mn     Cr       V

0,90   0,25   2,00   0,35    0,10


 

Obtainable hardness: 62 - 65 HRC

---------------------------------------------------------------------------------------------------

Knife: AgorEDC

Steel: Bohler PM M390 Tool Steel

Thickness of 4,3 mm

Hardness: 60 HRC

Handle: Green Canvas Micarta sandblasted

Attachment: Turn stainless torx screws

Finish blade: Stonewash after fine sandblasting

Size:

Total length: 238 mm

The width of the blade: 32 mm

Blade 110 mm

Weight 228 g.

Sheath: 2 mm black ABS 2 mm with Big TekLok
 

-------------------------------------------------------------------------------------------------------

Knife: ODC125

Steel: Vanadis 4 Extra PM Stainless Tool Steel

Thickness of 3,7 mm

Hardness: 62 HRC Secondary hardness

Handle: Brown Canvas Micarta sandblasted

Attachment: Turn black steel M4 imbus screws

Finish blade: Stonewash

Size:

Total length: 255 mm

The width of the blade: 35 mm

Blade 125 mm

Weight 236 g.

Sheath: 2 mm black ABS with Big TekLok

------------------------------------------------------------------------------------------------------

Knife: Hunter

Steel: Vanadis 4 Extra PM Stainless Tool Steel

Thickness of 3,7 mm

Hardness: 62 HRC Secondary hardness

Handle: Black or red G10 sandblasted

Attachment: Turn black steel M4 imbus screws

Finish blade: Stonewash

Size:

Total length: 250 mm

The width of the blade: 25 mm

Blade 125 mm

Weight 166 to 184(red one) g.

Sheath: 2 mm black ABS with Big TekLok
 

 

------------------------------------------------------------------------------------------------

Knife: ODC140

Steel: O2 Tool Steel

Thickness of 4,4 mm

Hardness: 59 HRC

Handle: Brown Micarta, G10 Black or Red sandblasted

Attachment: Turn black imbus screws

Finish blade: Stonewash after fine sandblasting

Size:

Total length: 270 mm

The width of the blade: 32 mm

Blade 140 mm

Weight 278 - 298 g.

Sheath: 2 mm black ABS 2 mm with Big TekLok

ODC I

ODC II

 

ODC III

ODC IV

---------------------------------------------------------------------------------------------------------

Knife: PushDagger

Steel: A8Mod Tool Steel

Thickness of 6,8 mm

Hardness: 57-58 HRC

Handle: G10 black sandblasted

Attachment: Turn black imbus screws

Finish blade: Stonewash

Size:

Total length: 180 mm

The width of the blade: 45 mm

Blade 105 mm

Weight 255 g.

Sheath: 1,5 mm black Kydex with Big TekLok

 

------------------------------------------------------------------------------------------------------------

Knife: AgorEDC

Steel: Vanadis 4 Extra PM Stainless Tool Steel

Thickness of 4,7 mm

Hardness: 63 HRC Secondary hardness

Handle: G10 Black sandblasted

Attachment: Turn stainless steel M5 torx screws

Finish blade: Stonewash

Size:

Total length: 255 mm

The width of the blade: 33 mm

Blade 125 mm

Weight 219 g.

Sheath: 1,5 mm black Kydex with Big TekLok
 

-------------------------------------------------------------------------------------

Knife: Bushcraft

Steel: O1 Tool Steel

Thickness of 4 mm

Hardness: 60 HRC

Handle: G10 Orange + 1 mm yellow liners

Attachment: Turn black M5 imbus screws

Finish blade: Satin

Size:

Total length: 220 mm

The width of the blade: 30 mm

Blade 110 mm

Weight 180 g.

Sheath: 1,5 mm black Kydex with Big TEKLOK
 


----------------------------------------------------------------------------------------------------------

Knife: Agor

Steel: O2 Tool Steel

Thickness of 4,4 mm

Hardness: 60 HRC

Handle: Brown Micarta sandblasted

Attachment: Turn black imbus screws

Finish blade: Stonewash

Size:

Total length: 265 mm

The width of the blade: 32 mm

Blade 140 mm

Weight 255 g.

Sheath: 1,5 mm black Kydex/ABS 2 mm with Big TekLok

Agor I
 


Agor II
 

------------------------------------------------------------------------------------------------------------

Knife: Mikko

Steel: O2 Tool Steel

Thickness of 4,4 mm

Hardness: 60 HRC

Handle: Brown Micarta sandblasted

Attachment: Turn black imbus screws

Finish blade: Stonewash

Size:

Total length: 265 mm

The width of the blade: 32 mm

Blade 130 mm

Weight 255 g.

Sheath: 1,5 mm black Kydex/ABS 2 mm with Big TekLok
 

---------------------------------------------------------------------------------------------

IMPORTANT NOTE:

Bohler Stainless Steel N690 tool steel is very good steel.

But when hard is not very tough for heavy works especially with the tip.

So:

No rust, holds working edge long, easy to sharpen but not suitable for tanks or windows opening. You can loose the tip.

Perfect for kitchen, cutting, slicing or skinning.

Please consider this when buying.

--------------------------------------------------------------------------------------------------

Knife: Agor

Steel:N690 Bohler Stainless Tool Steel

Thickness of 4,4 mm

Hardness: 58 HRC Secondary hardness

Handle: Brown canvas micarta sandblasted

Attachment: Turn stainless steel M5 torx screws

Finish blade: Stonewash

Size:

Total length: 265 mm

The width of the blade: 34 mm

Blade 140 mm

Weight 245 g.

Sheath: 2 mm black ABS with Big Tek-Lok
 

licznik odwiedzin